Having handmade, custom cherry bookshelves in your home would tend to draw someone to the home office just for the ambiance they create.  Design elements of bookshelves can be beautiful, functional and intriguing.  With a little creativity and some master carpentry, we found a way to have a secret passage in our homes.  Bookshelves can be placed anywhere; in an office, a hallway, or outside a bedroom perhaps.  The fun part is making a functional door through the cabinets that is not apparent but can provide some utility and mystery in the home. 

In this case, the cabinets are installed at the top of a cantilevered, custom, handmade walnut staircase, but are also accessible to another room through a hidden doorway designed into the bookshelves.  The bookshelf design features floor to ceiling columns,  full caps and bases with adjustable shelves that are certain to be filled. 

On one side of the hidden door you see the bookshelves.  On the other side, the door face will match the design of the solid core doors used throughout the home. 

Feel free to e-mail me with your questions and comments.  I can be reached at Bob@NatelliHomes.com or visit our website www.natellihomes.com.

Natelli Homes recently completed a kitchen renovation to a home in Potomac, MD.  We used custom WoodMode cabinets, Kashmere Gold perimeter granite countertops with antique honed finishes and professional grade Wolf, Subzero and Dacor appliances – all high-end components that would make any kitchen stand out.  The Woodmode cabinets with a distressed Cottage White finish on the surrounding wall and base cabinets make the rich wood-tones of the island stand out.

The existing kitchen was limited in width so the client made some creative decisions to make the island the most notable feature in the project without harming valuable space.  The cherry cabinets in the island are a rich Burnished Tuscan Sun finish from WoodMode’s array of custom options and finishes.  At the end of the island is a maple butcher block that the client found in an antique shop.  We studied the butcher block with our WoodMode kitchen designer and made a custom base that would look as if they were both designed with the original cabinets. 

The most challenging part of the project was the custom zinc top.  Knowing that zinc is a soft metal that can scratch and stain unless properly cared for, we debated for several weeks with the client about that choice of material.  Finally after much discussion on the pros and cons, we carefully measured for the top and made a template for the zinc manufacturer.  Even in the Washington, DC metropolitan area, not many firms are experienced or qualified to make a zinc top, so we ended up using a firm in Texas.  The separation from DC to Texas was not very comforting as all dimensions and details had to be confirmed over e-mail or the phone. Obviously the top came out great.  It is a beautiful, completely unique feature in what could have been an outstanding but somewhat typical kitchen renovation. 

Credit goes to the client for knowing what they wanted, researching the issues and sticking to their instincts.  We are pleased to have been a part of another beautiful kitchen renovation with different challenges and such notable differences in the finished product.

Feel free to contact me with any questions or comments.  I can be reached at Bob@NatelliHomes.com or visit our website at www.natellihomes.com

Full window replacement systems vary from manufacturer to manufacturer.  Marvin Window’s system using a Kynar jamb extension is a nice way to provide a clean and maintenance free exterior application.

In the photo on the right, the old window has been completely removed and a new Marvin full replacement window has been installed in the opening.  Note how the minimally expanding foam fills the entire cavity between the window frame and the rough opening.  Nothing can get though the gap – not wind, not water nor bugs.

But to cap it off, literally, Marvin has a clean system that snaps into the exterior window frame and butts against the existing brick opening.  This jamb extension using Marvin’s extremely durable extruded aluminum is substantially stronger than roll-form aluminum and features a protective 70% Kynar® 500 paint finish for superior resistance to fading and chalking.  Kynar, in particular resists fading and comes in 19 colors.

I am very impressed with this replacement system from Marvin and encourage anyone who is ready to consider new windows to look at Marvin.

Feel free to contact me at Bob@NatelliHomes.com or visit our website www.natellihomes.com

“Just do it!” – a notable trademark of Nike that catches everyones eye.  I always wanted to make tee-shirts for my employees that said, “Just do it right!”  I paused for fear of trademark infringement, but still like the message.  I am confident that our team thinks that way, even though we don’t have the tee-shirts.

In the case of replacing a dormer window, it would have been easy to plug the new window in and consider the job done, but that would have been a huge disservice to our client.  The trim around the window was rotting and the siding was all but deteriorated.  I wonder how much water was getting into the home through the trim and siding alone.

We chose to remove everything, down to the exterior sheathing so we could observe the flashing and ensure that the dormers were flashed, sealed and water and air infiltration were managed properly.

The new finished product assures our client of a weather-proof installation that will stand the test of time.  We used synthetic exterior millwork, 70% Kynar 500® cladding on the Marvin Windows and a cement based siding on the sides of the dormer. The Kynar cladding from Marvin Windows and Doors comes with a 20 year warranty.  The synthetic trim and cement siding takes paint well and resists rot and deterioration for years to come.  The future maintenance requirements will be minimal.

Always look at the bigger picture and don’t cut corners on a significant investment such as window replacements.  Find a contractor that is familiar with the best products and procedures in your marketplace.  Evaluating all the issues for a client up front is a detail that can’t be overlooked.

Feel free to contact me at Bob@NatelliHomes.com or visit our website www.natellihomes.com

Fireplaces are wonderful complements to any home. When the resources are available for stone or antique mantles, the attention to detail becomes all that more crucial. Steep roof lines and exotic stone work make for beautiful design features, but a chimney and flue that leak quickly become a damaging and very costly repair job. Spending the time and energy to do it perfectly from the outset, is the name of the game.

The chimney block at right has been waterproofed completely, before any finished veneer is applied, and the through-wall flashing has been wrapped around the block and stepped-down to accept the stone and brick that will create the finished surface. The entire structure is fabricated to repel and channel water off the roof, before any stone veneer is applied or brick laid.
Knowing that the construction of a chimney has been given the same attention as the fine millwork and details within the home can be very comforting for an owner. When striking stone work is coupled with contrasting roofing tiles and dramatic angles, the home becomes a movie set in the making.

But it cannot be overstated. If your builder treats a chimney and fireplace as just something else that has to be done, then find a builder that understands how to build that one-of-a-kind fireside masterpiece.

This marriage of an antique French fireplace to a flue and chimney system, that are works of artful design and engineering, will create a stunning atmosphere of warmth and singularity for many years to come.

Feel free to contact me at Bob@NatelliHomes.com or visit our website www.natellihomes.com

Minimizing noise transmitted from various rooms is an often overlooked component of construction – whether a new home or a renovation.  Theaters, bathrooms, laundry rooms, family room and offices all emit a potentially significant amount of sound.  For the most part, home-owners hope to keep those sounds within each room and minimize the amount of sound that travels to other rooms.

The construction industry has a standard to measure the effectiveness of a wall partition or assembly in reducing sound transmission to an adjacent room.  The Sound Transmission Class (STC) is a numeric rating of the sound reduction for a given partition type.  In general, the higher the STC rating, the more noise or sound is eliminated from room to room.  For example a typical 2×4 wall with 1/2” drywall on both sides has an STC of approximately 25 – 30.  By simply adding batt insulation in the wall one can increase the STC rating of the wall by about 5 rating points to 30 – 35.

A 5 point change in an STC rating will be clearly noticeable. A 10 point change in an STC rating will drop the sound transmission through the wall by about one-half.

In sensitive areas, one should try to get an STC rating for a wall between 40 and 50.  An easy way to accomplish this uses a 2×6 wall plate and 2×4 wall studs staggered on each side of the wall. Fiberglass batt insulation is then woven through the staggered cavities of the wall studs.  This wall configuration, which is easy to construct with common framing materials and standard insulation, produces an STC rating close to 50.

Sound travels easily through the weaker structural elements like doors, windows and electrical outlets.  Builders should focus on ways to add additional insulation or separate the structural components wherever possible.

In one of my next posts, I’ll describe how to achieve a similar if not greater STC rating in a ceiling at very little cost.

I enjoy hearing from my readers.  Feel free to contact me at bob@natellihomes.com or visit our website at www.natellihomes.com

In our first bathroom design evaluation, we looked at the design potential of a typical bathroom in the metropolitan Washington, D.C. area assuming we wanted the primary components to include a vanity, shower, toilet and tub.  If you look back at that post, you will see that we actually increased the usable and functional space within the confines of the existing room.  The original bathroom is shown in the image to the right.

For the current option, we are going to be honest with ourselves about the need for a tub.  Natelli Homes has installed hundreds of tubs in Master Suites over the years.  Upon reflection the vast majority of our clients admit that they might use a tub a few times a year.  So let’s see what one gains if we allocate the space taken up by the tub for more vital funtions in a bathroom. 

The first thing that strikes me is an expansive double bowl vanity with lots of surface area and potential for ample storage below.  One can image a wood framed mirror over the vanity with attractive sconces complimented by some recessed pin lights in the ceiling.  The toilet is within a room with a door for complete privacy.  The shower is still ample allowing for a bench, multiple spray heads and a rain-shower above.

A small recess into the sloped roof area behind the vanity expands the room slightly, but this comes at a minimal cost with huge benefits.  The hallway is aligned with the entrance so the closets have expanded nearly 150% of their prior size.  All these benefits come within the boundaries of the existing space with the exception of the small expansion behind the vanities.

Good design supported by practical evaluation makes for a successul bathroom renovation.  In our next evaluation we will see how the potential grows when a small dormer is set into the rear roof. 

Feel free to e-mail me your questions and comments to Bob@NatelliHomes.com or visit our website  www.NatelliHomes.com

Everyone seems to be spending lots of time at home working on their business, so more and more of our clients are looking for ways to accomplish this need.  In this case we converted a large hallway adjacent to an open 2nd floor foyer into a work area.  Working with WoodMode cabinets we created a very effective work area.

There is a pull out desk-top for additional work surface area, file storage, customized spaces for the hard drive, keyboard and computer display.  The pull out desk-top slides imperceptibly back into the cabinets when not in use.

The desk top is set lower to a table top height while the adjacent cabinets are slightly higher for more storage. Clever features and details make this space functional and attractive.  Note the large windows adjacent to the desk that bring ample natural light to the work areas.